V-221875

Discussion

Enabling reverse path filtering drops packets with invalid source addresses received on the interface. It should not be used on systems which are routers for complicated networks, but is helpful for end hosts and routers serving small networks.

Check Content

Verify the system uses a reverse-path filter for IPv4:

     # grep -r net.ipv4.conf.default.rp_filter /run/sysctl.d/* /etc/sysctl.d/* /usr/local/lib/sysctl.d/* /usr/lib/sysctl.d/* /lib/sysctl.d/* /etc/sysctl.conf 2> /dev/null
     net.ipv4.conf.default.rp_filter = 1

If "net.ipv4.conf.default.rp_filter" is not configured in the /etc/sysctl.conf file or in any of the other sysctl.d directories, is commented out, or does not have a value of "1", this is a finding.

Check that the operating system implements the accept source route variable with the following command:

     # /sbin/sysctl -a | grep net.ipv4.conf.default.rp_filter
     net.ipv4.conf.default.rp_filter = 1

If the returned line does not have a value of "1", this is a finding.

If conflicting results are returned, this is a finding.