← Back to Network WLAN AP-NIPR Platform Security Technical Implementation Guide

V-243226

CAT II (Medium)

The network device must not be configured to have any feature enabled that calls home to the vendor.

Rule ID

SV-243226r720133_rule

STIG

Network WLAN AP-NIPR Platform Security Technical Implementation Guide

Version

V7R3

CCIs

CCI-002433

Discussion

Call-home services will routinely send data such as configuration and diagnostic information to the vendor for routine or emergency analysis and troubleshooting. There is a risk that transmission of sensitive data sent to unauthorized persons could result in data loss or downtime due to an attack. (See SRG-NET-000131-RTR-000083.)

Check Content

Review the device configuration to determine if the call home service or feature is disabled on the device. 

If the call home service is enabled on the device, this is a finding.

Note: This feature can be enabled if the communication is only to a server residing in the local area network or enclave.

Fix Text

Configure the network device to disable the call home service or feature.

Note: This feature can be enabled if the communication is only to a server residing in the local area network or enclave.