STIGhubSTIGhub
STIGsRMF ControlsCompare
STIGhub— A free STIG search and compliance tool·STIGs updated 3 days ago
Powered by Pylon·Privacy·Terms·© 2026 Beacon Cloud Solutions, Inc.
← Back to Network Device Management Security Requirements Guide

V-202007

CAT II (Medium)

The network device must initiate a session lock after a 15-minute period of inactivity.

Rule ID

SV-202007r960741_rule

STIG

Network Device Management Security Requirements Guide

Version

V5R4

CCIs

CCI-000057

Discussion

A session lock is a temporary network device or administrator-initiated action taken when the administrator stops work but does not log out of the network device. Rather than relying on the user to manually lock their management session prior to vacating the vicinity, network devices need to be able to identify when a management session has idled and take action to initiate the session lock. Once invoked, the session lock shall remain in place until the administrator re-authenticates. No other system activity aside from re-authentication shall unlock the management session. Note that CCI-001133 requires that administrative network sessions be disconnected after 10 minutes of idle time. So this requirement may only apply to local administrative sessions.

Check Content

Review the network device configuration to see if it initiates a session lock after a 15-minute period of inactivity.  This may be verified by configuration check or demonstration. If a session lock is not initiated after a 15-minute period of inactivity, this is a finding.

Fix Text

Configure the network device to initiate a session lock after a 15-minute period of inactivity.