V-286559

Discussion

Double encapsulation can be initiated by an attacker who has access to a switch port belonging to the native VLAN of the trunk port. Knowing the victim's MAC address and with the victim attached to a different switch belonging to the same trunk group, thereby requiring the trunk link and frame tagging, the malicious user can begin the attack by sending frames with two sets of tags. The outer tag that will have the attacker's VLAN ID (probably the well-known and omnipresent default VLAN) is stripped off by the switch, and the inner tag that will have the victim's VLAN ID is used by the switch as the next hop and sent out the trunk port.

Check Content

Verify the Aviat WTM does not have any switch ports assigned to the native VLAN with the following steps:

1. Log on to the Web UI using an admin account.
2. Using the Web UI, navigate to Switching and Routing >> VLAN Management >> Membership.
3. For each switch port, verify the VLAN assignment is not set to the native VLAN ID.

If any switch port is assigned to the native VLAN, this is a finding.