STIGhubSTIGhub
STIGsRMF ControlsCompare
STIGhub— A free STIG search and compliance tool·STIGs updated 3 days ago
Powered by Pylon·Privacy·Terms·© 2026 Beacon Cloud Solutions, Inc.
← Back to Arista MLS EOS 4.X Router Security Technical Implementation Guide

V-255989

CAT II (Medium)

The Arista BGP router must be configured to reject inbound route advertisements for any prefixes belonging to the local autonomous system (AS).

Rule ID

SV-255989r882309_rule

STIG

Arista MLS EOS 4.X Router Security Technical Implementation Guide

Version

V2R2

CCIs

CCI-001368

Discussion

Accepting route advertisements belonging to the local AS can result in traffic looping or being black holed, or at a minimum using a non-optimized path.

Check Content

Review the Arista router configuration to verify that it will reject routes belonging to the local AS.

The prefix filter must be referenced inbound on the appropriate BGP neighbor statements.

Step 1: Review the prefix lists configured on the router to filter the local AS prefix (10.12.0.0/16). To verify IP prefix lists are configured, execute the command "show ip prefix-list".

router#sh ip prefix-list
router#ip prefix-list LOCAL_SCOPE_BOUNDARY
   seq 10 deny 10.12.0.0/16
   seq  100 permit  0.0.0.0/0 le32

Step 2: Review the BGP configuration to verify the prefix filter is applied inbound to the BGP neighbor. To verify the BGP config and verify the prefix is applied, execute the command "show run | section router bgp".

router bgp 65000
  router-id 10.11.11.11
  address-family ipv4
    no neighbor 10.11.12.2 prefix-list out     
    neighbor 10.12.0.0 prefix-list LOCAL_SCOPE_BOUNDARY in

If the Arista router is not configured to reject inbound route advertisements belonging to the local AS, this is a finding.

Fix Text

Configure Arista eBGP routers to reject inbound route advertisements for prefixes that are not allocated to that specific customer.

Step 1: Configure the prefix-list to reject inbound route advertisements belonging to the local AS.

router(config)#ip prefix-list LOCAL_SCOPE_BOUNDARY
router(config-ip-pfx)#seq 10 deny 10.12.0.0/16
router(config-ip-pfx)#seq 100 permit 0.0.0.0/0 le32
 
Step 2: Configure a route-map to match the prefix-list.

router(config)#route-map LOCAL_AS deny
router(config-route-map-LOCAL_AS)#match IP address prefix-list LOCAL_SCOPE_BOUNDARY
router(config-route-map-LOCAL_AS)#exit

Step 3: Configure the route-map to be applied inbound to the appropriate BGP neighbor.

router(config)#router bgp 65000
router(config-router-bgp)#neighbor 10.12.0.0 prefix-list LOCAL_SCOPE_BOUNDARY in