← Back to Microsoft Windows 10 Security Technical Implementation Guide

V-220701

CAT II (Medium)

Windows 10 must employ automated mechanisms to determine the state of system components with regard to flaw remediation using the following frequency: continuously, where ESS is used; 30 days, for any additional internal network scans not covered by ESS; and annually, for external scans by Computer Network Defense Service Provider (CNDSP).

Rule ID

SV-220701r939261_rule

STIG

Microsoft Windows 10 Security Technical Implementation Guide

Version

V2R9

CCIs

CCI-001233

Discussion

An approved tool for continuous network scanning must be installed and configured to run. Without the use of automated mechanisms to scan for security flaws on a continuous and/or periodic basis, the operating system or other system components may remain vulnerable to the exploits presented by undetected software flaws. To support this requirement, the operating system may have an integrated solution incorporating continuous scanning using ESS and periodic scanning using other tools, as specified in the requirement.

Check Content

Verify DoD-approved ESS software is installed and properly operating. Ask the site ISSM for documentation of the ESS software installation and configuration.

If the ISSM is not able to provide a documented configuration for an installed ESS or if the ESS software is not properly maintained or used, this is a finding.

Note: Example of documentation can be a copy of the site's CCB approved Software Baseline with version of software noted or a memo from the ISSM stating current ESS software and version.

Fix Text

Install DoD-approved ESS software and ensure it is operating continuously.