STIGhubSTIGhub
STIGsRMF ControlsCompare
STIGhub— A free STIG search and compliance tool·STIGs updated 3 days ago
Powered by Pylon·Privacy·Terms·© 2026 Beacon Cloud Solutions, Inc.
← Back to Tri-Lab Operating System Stack (TOSS) 5 Security Technical Implementation Guide

V-282693

CAT II (Medium)

TOSS 5 must not respond to Internet Control Message Protocol (ICMP) echoes sent to a broadcast address.

Rule ID

SV-282693r1201059_rule

STIG

Tri-Lab Operating System Stack (TOSS) 5 Security Technical Implementation Guide

Version

V1R1

CCIs

CCI-000366

Discussion

Responding to broadcast (ICMP) echoes facilitates network mapping and provides a vector for amplification attacks. Ignoring ICMP echo requests (pings) sent to broadcast or multicast addresses makes the system slightly more difficult to enumerate on the network.

Check Content

Verify TOSS 5 does not respond to ICMP echoes sent to a broadcast address using the following command:

$ sudo sysctl net.ipv4.icmp_echo_ignore_broadcasts

net.ipv4.icmp_echo_ignore_broadcasts = 1

If the returned line does not have a value of "1", or a line is not returned, this is a finding.

Check that the configuration files are present to enable this network parameter.

$ sudo /usr/lib/systemd/systemd-sysctl --cat-config | egrep -v '^(#|$)' | grep -F net.ipv4.icmp_echo_ignore_broadcasts | tail -1

net.ipv4.icmp_echo_ignore_broadcasts = 1

If "net.ipv4.icmp_echo_ignore_broadcasts" is not set to "1" or is missing, this is a finding.

Fix Text

Configure TOSS 5 to not respond to IPv4 ICMP echoes sent to a broadcast address.

Add or edit the following line in a single system configuration file, in the "/etc/sysctl.d/" directory:

net.ipv4.icmp_echo_ignore_broadcasts = 1

Load settings from all system configuration files using the following command:

$ sudo sysctl --system