STIGhubSTIGhub
STIGsRMF ControlsCompare
STIGhub— A free STIG search and compliance tool·STIGs updated 3 days ago
Powered by Pylon·Privacy·Terms·© 2026 Beacon Cloud Solutions, Inc.
← Back to SLES 12 Security Technical Implementation Guide

V-217293

CAT II (Medium)

The SUSE operating system must not allow interfaces to accept Internet Protocol version 6 (IPv6) Internet Control Message Protocol (ICMP) redirect messages by default.

Rule ID

SV-217293r991589_rule

STIG

SLES 12 Security Technical Implementation Guide

Version

V3R2

CCIs

SV-96519

Discussion

ICMP redirect messages are used by routers to inform hosts that a more direct route exists for a particular destination. These messages modify the host's route table and are unauthenticated. An illicit ICMP redirect message could result in a man-in-the-middle attack.

Check Content

Verify the SUSE operating system does not allow IPv6 ICMP redirect messages by default.

Check the value of the "default accept_redirects" variables with the following command:

# sudo sysctl net.ipv6.conf.default.accept_redirects
net.ipv6.conf.default.accept_redirects = 0

If the returned line does not have a value of "0", this is a finding.

Fix Text

Configure the SUSE operating system to not allow IPv6 ICMP redirect messages by default. 

Set the system to the required kernel parameter by adding the following line to "/etc/sysctl.conf" (or modify the line to have the required value):

net.ipv6.conf.default.accept_redirects=0

Run the following command to apply this value:

# sysctl –system