← Back to Oracle Linux 9 Security Technical Implementation Guide

V-271871

CAT II (Medium)

OL 9 must use a reverse-path filter for IPv4 network traffic, when possible, by default.

Rule ID

SV-271871r1172843_rule

STIG

Oracle Linux 9 Security Technical Implementation Guide

Version

V1R5

CCIs

CCI-000366

Discussion

Enabling reverse path filtering drops packets with source addresses that should not have been able to be received on the interface on which they were received. It must not be used on systems that are routers for complicated networks but is helpful for end hosts and routers serving small networks.

Check Content

Verify OL 9 uses reverse path filtering on IPv4 interfaces with the following commands:

$ sysctl net.ipv4.conf.default.rp_filter
net.ipv4.conf.default.rp_filter = 1

If the returned line does not have a value of "1", or a line is not returned, this is a finding.

Fix Text

Configure OL 9 to use reverse path filtering on IPv4 interfaces by default.

Add or edit the following line in a single system configuration file in the "/etc/sysctl.d/" directory:

net.ipv4.conf.default.rp_filter = 1

Load settings from all system configuration files with the following command:

$ sudo sysctl --system