Rule ID
SV-283876r1204032_rule
Version
V1R1
CCIs
Many of the known attacks in stateless autoconfiguration are defined in RFC 3756 and were present in IPv4 ARP attacks. To mitigate these vulnerabilities, links that have no hosts connected, such as the interface connecting to external gateways, must be configured to suppress Router Advertisements.
This requirement is not applicable for the DODIN Backbone. Review the router configuration to verify Router Advertisements are suppressed on all external IPv6-enabled interfaces. Use the command below and verify for each interface the "RtrAdvertisement Tx" value: - show router rtr-advertisement Router Advertisement Interface: TO-PE2 ------------------------------------------------------------------------------- Rtr Advertisement Tx : 4 Last Sent : 00h05m01s Nbr Solicitation Tx : 3097 Last Sent : 00h00m53s Nbr Advertisement Tx : 3078 Last Sent : 00h00m53s Rtr Advertisement Rx : 0 Rtr Solicitation Rx : 0 Nbr Advertisement Rx : 3095 Nbr Solicitation Rx : 3078 ------------------------------------------------------------------------------- Max Advert Interval : 600 Min Advert Interval : 200 Managed Config : FALSE Other Config : FALSE Reachable Time : 00h00m00s0ms Router Lifetime : 00h30m00s Retransmit Time : 00h00m00s0ms Hop Limit : 64 Link MTU : 0 ND Router Preference : medium MAC Addr To Use : Interface Creation Origin : manual No Prefixes If the router is not configured to suppress Router Advertisements on all external IPv6-enabled interfaces, this is a finding.
Configure the router to suppress Router Advertisements on all external IPv6-enabled interfaces, as shown in the example below: - configure router router-advertisement interface "TO-PE2" shutdown