← Back to VMware vRealize Automation 7.x SLES Security Technical Implementation Guide

V-240548

CAT II (Medium)

The SLES for vRealize must enforce a delay of at least 4 seconds between logon prompts following a failed logon attempt.

Rule ID

SV-240548r671385_rule

STIG

VMware vRealize Automation 7.x SLES Security Technical Implementation Guide

Version

V2R2

CCIs

CCI-000366

Discussion

Limiting the number of logon attempts over a certain time interval reduces the chances that an unauthorized user may gain access to an account.

Check Content

Verify the SLES for vRealize enforces a delay of at least "4" seconds between logon prompts following a failed logon attempt.

Review the file "/etc/login.defs" and verify the parameter "FAIL_DELAY" is a value of "4" or greater. 

# grep FAIL_DELAY /etc/login.defs

The typical configuration looks something like this:

FAIL_DELAY    4

If the parameter "FAIL_DELAY" does not exists, or is less than "4", this is a finding.

Fix Text

Configure the SLES for vRealize to enforce a delay of at least "4" seconds between logon prompts following a failed logon attempt.

Set the parameter "FAIL_DELAY" to a value of "4" or greater.

Edit the file "/etc/login.defs". Set the parameter "FAIL_DELAY" to a value of "4" or greater.

The typical configuration looks something like this:

FAIL_DELAY    4

Save the changes made to the file.